Tuesday, March 25, 2014

How to root the Samsung Galaxy S III I9300, I9305















ODIN >>> 3.9 >>> http://goo.gl/od5Y26
                                               or
ODIN >>> 3.4 >>> http://goo.gl/QQBVRu

CF-Auto RooT >>> http://goo.gl/XJll3Z


Mirror Download link >>>>  http://goo.gl/9rZKLH



Details Description about Root......



Preparations Before Rooting:

In the following tutorial, we’ll install a the ClockworkMod recovery that will replace the stock recovery on your Galaxy S4, and then we’ll install the SuperUser app via it. But before we do that, let’s take care of the following things first.
  • Download Odin3 1.85 to install the CF Auto Root: Odin 3.9.zip or Odin 3.4.zip
  • OR,If you want to install CWM Touch Recovery with enhanced options modded by PhilZ, download the following file: Philz_touch_5.06.0-I9500.Tar.Md5
  • Download the CF-Auto-Root by Chainfire (extract the zip): CF-Auto-Root-Ja3g-Ja3gxx-Gti9300.Zip
  • Download and install Samsung USB Drivers on your PC. If you have already installed Samsung Kies, you can skip installing the drivers but make sure that Kies is closed while you use Odin.
  • Make sure your S4 has at least 60% battery left on it. If not, plug the charger now.
  • Turn on USB Debugging from your phone’s Settings> Developer options. 

Rooting Galaxy S3 GT-I9300:

Now here are the easy steps to install the root package to your Galaxy S3-
  1. Turn off your device and boot it into Download/Odin mode. To do this, press and hold the Volume Down + Home + Power keys simultaneously for about 3-4 seconds till the screen turns up and you see a warning screen. Press Volume Up to continue to the Download mode.Galaxy-s4-download-mode
  2. Launch Odin3 1.85 and connect device to PC.
  3. When Odin detects the device,  the ID:COM port will turn Yellow and you’ll see “Added!!” at the message box on Odin.
  4. Make sure that only“Auto Reboot” option is ticked on Odin (see below).
  5. Now click on PDA button and  select “CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5″.
  6. Finally click the Start button on Odin and let the installation finish followed by PASS! message.Galaxy-S4-GT-I9500-Root-Odin
  7. Now disconnect the USB cable and pull out the back cover of your Galaxy S3. Remove the battery and put it back after 30-40 seconds.

GALAXY-S4-SUPERUSER

You device will now reboot and it might take a couple of minutes before it boots up normally. Now you can see a new app called SuperUser in your phone’s app drawer. To verify if the root access is working fine, you can install and run the Root Checker app from the Play Store.


Install CWM Recovery on Galaxy S3GT-I9300:

Your Galaxy S3 already has root access now. If you also want a custom recovery to be installed on your phone,  follow the the same steps as you did above while rooting the device.
  1. Boot Galaxy S4 into Download Mode (Volume Down+Home+Power).
  2. Launch Odin3 v3.04 and connect the device to PC using USB cable.
  3. Or, in case you have downloaded PhilZ CWM Touch recovery, select: philz_touch_5.06.0-i9500.tar.md5
  4. Make sure that only “Auto Reboot” and “F Reset Time” are selected on Odin.
  5. Finally, hit Start button and wait till CWM is installed followed by a PASS! message. Your device will now reboot automatically.Galaxy-S4-GT-I9500-Root-Odin-CWM
  6. To enter the ClockworkMod recovery mode anytime, turn off your phone and hold down Volume Up+Home+Power buttons for 3-5 seconds till the screen turns up, your see “Samsung Galaxy S III” logo. Now release the Power key and wait till you see a screen like shown below:
  7. PhilZ Touch CWM recovery will look like this: 
  8. If at any point of time you see a screen with following prompt in CWM, select “Yes- disable recovery flash” or you device will automatically replace CWM with Android System Recovery.
    ROM may flash stock recovery on boot. Fix?
    THIS CAN NOT BE UNDONE.
    - NO
    - YES - Disable recovery flash

No comments:

Post a Comment